(800) 680-2578 info@3dscanexperts.com

Do you have stairs in your house? Is it starting to show signs of wear and tear?

If so, it might need to be refinished. The last thing that you want to do is to wait until it breaks—that’ll just become a safety hazard. 

Toronto stair refinishing isn’t the easiest DIY project to take on, but it can be done.

Thinking of going for it and in need of a guide? We’ll be going over the different steps below.

Step 1: Sand the Entire Staircase

The first thing that you want to do is sand the staircase. Don’t have a sander? No problem—you can just use sandpaper. It might take a little more elbow grease and time, but the results will be similar.

The hardest part will probably be the spindles. For those, you’ll want to wrap the sandpaper and rub side to side.

Step 2: Wipe Down the Staircase 

Next, you want to wipe down the staircase to get rid of the dust. Go over the area with a vacuum cleaner and then mop up what’s left with a damp cloth.

This step is critical if you want a clean, even finish. The last thing that you want is for there to be debris when you’re painting!

Step 3: Apply Polyurethane 

Carefully apply polyurethane onto the surfaces. Make sure to follow the direction of the grain. In some cases, you might need to apply more than one layer.

This will not only protect the wood, but it’ll also give it a glossy sheen.

It might be a good idea to open the windows during this step as polyurethane tends to have a strong odor.

Step 4: Paint the Stairs

Finally, you’ll want to paint the steps. Consider using painter’s tape to cover the edges where the stairs meet the wall or riser.

Ideally, you want to start with the steps first. From there, you can work on the treads and spindles. Remember, you have to let the paint dry between coats.

If necessary, you can always do a bit of a touch up once it’s all dry.

Read >>>> painted stair ideas

Other Tips For Refinishing Stairs 

One of the most common mistakes is that people apply too much paint. This creates an uneven finish that takes a long time to dry.

You also want to make sure that all necessary repairs are done before you start the refinishing project. For example, you might want to patch visible holes with a wood filler.

Refinishing Stairs: The Takeaway

And there you have it—a short guide on refinishing stairs. Though it’s certainly a project many can attempt themselves, you might not end up with the clean, professional look you’re hoping for. 

Pin It on Pinterest

Share This